Larger View

G-S Hypo Cement

Price: $4.99

Exclusive needle-point applicator makes Hypo Cement perfect for all kinds of applications!

• For non-porous surfaces: plastic, metal, glass, beads, painted or sealed wood, etc.
• Dries clear, stays clear. A liquid cement, flows readily.
• Will not damage the surface to which it is applied. Will not bond fingers.
• The cement gets tacky after about 10-20 seconds. When tacky, begin assembly. Dries after about an hour. May take up to 24 hrs to dry completely. (may vary based on humidity)
• Available since the 1930's. A tried and tested product.

Tips:

• Flatten the tube as it is used; do not roll, twist or bend.
• Take care not to twist the tube, as twisting may cause the tube to crack.
• Do not exert pressure on the applicator when applying cement. Pressure can cause the precision applicator to become dislodged. Gently move the applicator along the surface while applying the cement.
• Place cap wire in applicator when not in use to stop the flow of cement out of the applicator.
• Always clean the precision applicator area and neck of the tube with acetone, nail polish remover, or rubbing alcohol before closing the cap. This will prevent the cement from sealing the cap to the tube.
• Store at room temperature, do not freeze or refrigerate.
• Because the cement likes to keep flowing out of the applicator once it starts....here is a helpful hint: If you do not have time to place the cap wire into the precision applicator between uses, keep an empty spice bottle in your work area, along with a small piece of sponge soaked in nail polish remover. After using the cement, set the tube "neck up" in the spice bottle and place the wet sponge over the precision applicator. This will stop the flow of cement and keep the applicator clean and ready to use.